Hello and welcome to the first video of the actual design, of course.
This is the home page of the construction designer.
And you can start your new project either from a template or from an empty file, for now, I will start
with an empty fight, just like you and once it opens.
You will see two views once ready and one to the plan you.
And the left hand, you can see the front windows such as such a.
When?
Loading status.
Groups and others in the sexual window, you can see only one level has been created.
Which is the base level, and you can many of these windows from windows that.
You can just click the show or hide the window in the way that suits you.
On the right hand, you can see the scene content which control the visible and invisible elements and
the of area, and you will see it in the next videos, you can manage these windows as you wish.
Just drive it to the new position.
But for now, I will leave it as Difford.
Now go to Hongta.
And you will see in the models of things.
We can't specify the cause of death is unknown based on I'm using the Unicode with a British standard,
you can see the action and the resistance codes.
Also, you may change the units.
You have the metric and the upstander and you can choose a specific quantity, achieve the quality.
There are many other preferences that you may have looked at, but for now I will leave it as default.
And just click, OK, when you finish.
Now, to define the level, go to model that construction levels.
You will see only the VIX level has been created and the type it's the off, which means a foundation,
I will give the level minus four meters for the double foundation and then click and set above the insert
a new level.
And this example will see three different steps to be modeled, slapped on beams, slap and flat slap,
and these were only for learning purposes.
I will assume that depth of foundation one meter and I will assume the spacing or the height of the
level is three meters or all of that is.
Also, you can define the level as unique story or similar to the other story in case you have to become
stories.
Also, it's important to understand the type of that I'm using this as, which means that system, however,
that he owes means Dubovsky and we will use it in the.
You can also add the slab thickness, it doesn't change the analysis, but only for graphics and visualizing
issues, the thickness of the slab on beams will be one hundred eighty meters and 240 millimeters for
the slab and the slab will have a cover slab with that thickness, 60 millimeters.
Once you finish, click, OK, and you will see all the levels have been created in the structure window.
Now we are going to do the great go to model tab, Graceland's.
You can draw a single grid line by specifying the first and the end point, or you can press F to enter
a specific distance.
Rescate is at the command.
Also, you can draw a parallel grid line.
Choose the gridline, choose the direction to enter the officers value and then specify the 1st and
the end point.
But escaped exit the command.
You can choose quick parallel, which allow you to draw a parallel line with the same length directly
or quickly.
Also, you can do a perpendicular grid line, the other one also by choosing the grid line and specifying
the first and the end point.
For now, I will delete all these lines.
And I will use the rectangular present.
And the rectangular was a specify the name of the grid.
And choose the levels that will include the threat, you may change the color if you wish the request.
The insertion point and the type of the lines.
And it's regular, you can't define the number and the spacing.
Or you can choose a regular and define the spacing with a comma.
Choose the name of the group if you want, and listed and then click next and send also the Y direction
axis.
You can see the rotation.
I don't have rotation and just click finish and you will see the good.
It's already now.
You can double click on any level in the structure window to open it.
And you can change the view in the plan view for three type or do the type from the simple small icon
and the like button, you can also draw radial access by using a sector was with the same technique.
Choose the name the color and that levels the insertion point.
And then insert the number and the spacing for the circular lines.
Also, the number and the angles or the radio lines.
Then specify the rotation.
And click finish when you have them.
I will believe the ideal access you can draw an arc gridline.
Specifically, the center point, the first point and the end point.
If you select the gridline and the properties window, you can, for example, adjust the balloon stip
you can show them or hide them from one side only.
The import of the file will be in the next video.
But finally, I will edit the great lines names from the property's windows.
And this is the end of this video.