And this video, we will see how to model flat slab and as I mentioned, there will be three types of
slabs and this project for learning purposes.
So in the second floor, go to model type and flat slab.
I will define a new SLAPP.
And the thickness of the flat slab will be 240 millimeters.
You can assign the reinforcement, the bar size and the spacing and the type of the reinforcement in
case you want to design the slab manually.
However, I will keep it as overdesigned.
For the flat type of slab, you can draw it as a whole slab.
It's not necessary to be separated for Span's.
I will draw the opening for the elevator and the stairs can be rectangular or circular and the property's
window, in my case, it's a rectangular.
And I will validate the model.
And the validation you can expand, it's a warning, not an error, if you Double-Click, on the warning
from the status window, it will shows the position of the warning graphically.
You can see that there's an overlapping between the opening and some other elements.
And this case is the control and the columns as well around the stairs.
So I will choose the opening and trying to resize it in order to solve this one.
Now, I would click validate again, and you can see there's still a warning because of a very small
part of the column, so I will right click on the warning and to disable this warning.
In case you want to reapply it, you can right click and go for sitting and you can see all the warning
and errors that Tekla will take into consideration.
And so you can check or uncheck any of these warnings, another flat slab is ready.