And this video, we will see how to design elements and more details, so after the analysis, we can
review the results and there is a view I'll choose a lot compensation and check the one the elements,
which is the columns and the beams.
So this is the sheer major, but I will change it and review the moment, Major, and the results.
And if I right click on Abeam, for example, I select Open Load analysis view, you can review it and
more details and you can see that Tekla has understood the whole thing with the multiple spans.
And here we can review the laws and the moments that she forces and the deflection as well.
But bear in mind that it's not necessary to be the maximum values.
It corresponds to the combination that we select also from Right Click, meaning you can choose report
for member at what shows the full report of the number.
You can adjust the view and you can review it continuously.
This is the calculation, and you can see it in different formats.
Now, I will choose open member of you, this will isolate the member and show the vertical and the
letter of support and you will see a new tab has been created, especially for this member.
So you can edit the member, for example, if you go to the properties, you can see some properties
and for the reinforcement also.
I would show no loadings and you can review all laws that is subjected to this member especially, and
you can generate drawings, I will keep the default settings and click, OK.
And this is drawing with the full detail of the law enforcement and the dimensions and the sections.
And you can see on the side also the tables of the materials and the bars that used.
And finally, I will review the interactive design, which is the most important tool, chose the design
accurately and the most details, and you can modify it and checked immediately.
And I reviewed previously, and this is the end of this video.
It was a quick video of the beam analysis.