Hi, so let's begin our first practical class of our civil discourse.
So if this is the first time you're opening the software, maybe you were visualizing all this interface
of the software or maybe you're seeing another screen that I'm going to show you here.
OK, this screen, let's remember that I'm using the Autodesk severe 3D version 2021, and if you're
using an older version, there is no problem.
Um, some versions may have some differences concerning visualization, but all of the tools and resources
that we are going to use, they're all the same.
So maybe there are some minimum changes, graphic ones, but that will not enable you for doing the
course.
But I always recommend to the most updated version of the software.
So let's begin.
So, uh, in case you're seeing this first screen, let's make here first acknowledgement of the interface.
And in this screen, it shows us the recent files over here that we're working.
And it also shows us the possibility to open files that we are working on or to create new ones.
So let's click in new.
And here we are at the interface of civil 3D, so let's begin from the left, uh, this left window
is very important.
It is called to space.
And in the case you're not seeing it, I'm going to close it here and you can come here on the home
tab and click once in to space and it will appear again.
And we have here, uh, a lot of characteristics of our project.
And we also have here on the right some catagories prospector's settings servi to box.
All these categories can be labeled or unlabelled, um, here on the top, uh, besides where we clicked
to able or enabled it to space so you can able it are disabled here.
They're not appearing again now you can see it again.
All right.
So we have a lot of settings over here, a lot of visualizations of our project.
So hearing prospector, for example, have the points here, which is very important point groups.
We also have the surface, which are the surface of our terrain that would go into detail here, the
alignments that you are going to understand the application of that on the future.
So this is a very important window in severity.
And right here on the bottom, we have three types.
The model, the layout, one and layout to the model tab is where are we going?
We're going to work our project and the Tab's layout one and layout two.
They are the creation tabs.
Uh, the creation of the sheets are going to be printed.
So here we're going to make all the settings about the sheet, about the documentation, the writing,
uh, containing the name of the project, the name of the author of the project.
But we are going to work, uh, effectively on the model tab here.
And so this is the main part of the program, D.R.
This is our work area and we can zoom in or zoom out or project just rolling the scroll of the mouse.
OK, and here on the right, we have, uh, Cube.
What?
We also have a rabbit, uh, the view cube.
And this is our cube.
It is marked as top.
It means that we're seeing our project from the top.
And we also have, uh, on the cube.
We have the north, south, east, west.
Uh, we also have here on the top a home button for us to reset our view.
OK, and we also, um, OK.
We also have here on the right a bunch of tools of quick access and also on the right a little bit to
the left, we have some zoom tools of navigation.
I'm not going to click on each of them in order to show you how each of them works, because it's much
better to show you on practice during the project, um, how they are use it and how can they can be
applied in practice.
And I think it's way more interesting, less boring, and the fix is better to learn learning.
It's much more organic to learn this way.
OK, so let's continue here on the bottom.
Uh, we have some settings that we can hide or show.
Just click in here on the right part.
Um, customization.
So, for example, dynamic input.
It corresponds to this icon.
And I'm going to click here and it is gone.
OK, so this customization, we can add or hide whatever we want here on the bottom.
OK, let's close here and in the top part here of the interface, we have two main lines.
So in case you're just seeing the first line, that's because you need to click on this down arrow over
here on OK and come here in Heideman Lubar.
Actually, I'm Senad menuBar.
I'm going to click here to hide my line, but if you click again, you're going to see the option.
Show menubar and I'm going to click and that's it.
So.
OK, so I suggest you to let these two lines of Manu's to be shown and this middle part here is known
by Reburn, that's the same name.
We also have the other softwares as Ravid aren't works.
So here on the rebound, we have a lot of Manou catagories.
And for each WAF, for each of one of these options, we also have, uh, other tools.
So here in home, for example, we have the two space, we have the profile view and we also have to
draw tools.
OK, and for which of of them.
Of these catagories.
We also have, uh, Arul down and if we click, we're going to show you more options.
OK, uh, all right.
So we have also here the insert.
We have tools related to the insertion of aliments annotate related to labels, to measures that can
be seen in the project.
We have MODIFY, which is another tab.
We have a bunch of menus inside these menus and it correspond to tools.
OK.
And right here on the top, we also have another, uh, menu.
Part of the other tools that we're going to use are the project and here on the top, we also have the
quick menu access.
So we have some fast options as to print, to send cell phone to save, to open your file.
OK.
OK, a little tip here in 3D as we are also having AutoCAD, we have an option.
Very interesting.
So you can come here on the top and click on this see icon and you can come to options, OK?
And we have the option to save automatically and I always recommend doing that.
So options we can click in open and save and come here on the bottom and able this option to save and
choose the time you want, the softer save your file.
Uh, other options, even if they're extremely new.
For example, Rabbitt, which is a software that I have courses about it, it just sends you reminders.
It doesn't save your files automatically.
But entry today is possible to do that is very important.
And I'm going to add the ten minutes here.
Uh, we have other options.
Um, OK.
We have other options here on the top, the other settings.
What can you see while you're, uh, dealing with various structures?
But I'm not going to change that.
Just like out of save.
I'm going to click.
OK, automatic cervical cancer, and let's remember that in security, we can also work with hotkeys.
And what are these hotkeys?
The hotkeys are instead of you clicking on a tool, for example, the to line.
OK, great line.
Uh, so it's a tool for you to create a line.
Um, I'm gonna OK, I'm going to click the LAT so you can't instead of clicking on this too, you can
just type line and press enter and that's it.
The two is able.
So let's remember that in 3D with 3-D, I need to type the command, the hotkey and press enter.
OK, not of the twos.
All of the tools have hotkeys, but the ones that we are going to see.
I'm going to show you the hotkeys, OK?
And in this course, each click you do on your screen, you're going to know why you're doing that.
So let's begin the project of our course.