I'm going to create so the part of a part of the road, so in this section, I'm going to select the
central part and click here in the home sorry, here in the home tab, I'm going to click in to Pilates
and I have several options here to choose.
Remember to click in lanes here on the menu and we have the shape trapezoidal.
We have, um, also the Lane Kovalik.
Um, so here on the top we have the generic pavement structure.
I'm going to choose four D K's the lane outside upper multilayer.
And here we have several options in order to configure the perimeters in the same way we had in order
to configure the central part of the road with the barrier.
And we have to keep the coherence between between these layers.
Um.
OK, and here we have side it is marked as right and we could click here and choose left, but I want
to do the first part, the right part of the route, and then I'm going to replicate it to the left
side.
OK, so I'm going to keep it, um, I'm going to keep it as it is and I'm going to zoom in here in this
red circle.
I'm going to click it.
And we have already here this part of the road.
I'm going to click, ask and see that the menu is gone.
I'm going to close this window and see that the layers here are not OK.
Um, just the two first ones.
And I'm going to select and it was first proposed and.
OK, right.
Click on it and let's go to properties and OK.
And here are the values, the numbers that really going to change, OK, to stay in accordance to the
first part of our central part of the layout.
So we see the right side here with if we're going to change, we have to click and change quickly.
OK, let's keep in four in default slope.
We're going to let it in minus two.
You pay one depth, which is the step of the first layer.
I'm going to keep the page that I'm going to keep it to the page three.
That is not this part over here.
Um, I'm going to exclude it.
I'm going to keep it in zero.
OK, if you if you have other layers, one exclude just modify it according to a project in base one
that there is this layer over here.
Um, base.
True.
It doesn't exist.
I'm going to keep the zero base three as well.
Zero.
And so the base OK, this sub base is this big one over there and I'm going to keep it um zero.
OK.
Poultry and the other was zero and zero, and here we have the right part of our road set, so I'm going
to click on Close Click.
Yes.
And what are we going to do now?
We can add the shoulders, OK, uh, here into the treaty.
So I'm going to select my the central line.
OK, and again, in the home, the home tab, I'm going to click OK, I'm going to click in two pilots
and here in catagories I'm going to look for Schroder's.
We have already a lot of options over here and sort of for I'm going to choose shoulder extend subbase,
OK, because that's the, the.
That's the element we are going to use in this case, it is over here.
Yes, so they're in subbase, OK?
We have the possibility of those configurations and are here on top first.
OK for you to see how it is and everything here can be set.
I'm going to ask.
Okay, yeah, and again, I was selected and right click.
And that sorry, OK, I'm going to close it here.
OK, so right, click on it.
Let's go to properties.
Yeah.
And we have here shoulder width.
OK, I'm going to change it to one meter.
Notice how it changed.
We also have here, um, OK.
Super elevation slope.
Uh, we have the default shoulder slope.
OK, uh I can put you OK.
Uh I'm going to go back to moves.
I'm sorry.
Six.
OK, it raised OK, I'm going to go back to moves over here, OK?
Minus six, that's why.
OK, I'm going to keep it up, um, just check if the information related to the pavement's are right.
So, for example, page one tap first layer is correct.
Page to.
OK, everyone is correct, the picture as well, and bed surveys, OK?
All correct.
So we can close this window, everything's fine.
And now what should we do?
Yeah, everything's fine, let's close here, and it is important for us to do the configuration so
that the software can read those cuts, those sections of the cut, and feel the amount of earth of
the terrain.
So we going to, again, select, um, we're going to go to the central line of our section and OK,
we're going to select it.
We're going to come here to two pilots and we're going to click on the category basic.
Keep basic here, so we have the option of basically this is the first one, I have several other options
over here, Busiek.
I have the basic shoulder, for example, um, let's click in Basic, the glide slope.
Cut, ditch.
OK, so let's select, OK, and now we're going to click and do a circle at the end of our shoulder.
OK, just one click.
And OK, see cut slope layout mode and Field's loop layout mode.
OK, we have the cut and the fuel, OK, and now we can close over here and you can replicate that to
what we have done.
The right side can replicate that to the left side.
So I'm going to ask and um, I'm going to OK, whoops.
I'm going to just one click with the mouse.
OK, and I'm going to select not the central part just over here, and I'm going to give a click with
the right button and I'm going to select Mirror, OK?
And I'm going to mirror just one click and it's ready to the to replicate.
Um, so look what the software brought me here.
Mirror Subassembly, Select Markhor points.
So software is asking me to select a point.
Uh huh.
I'm going to select here on the top and that's it.
The right part was replicated to the left side.
So it's ready section.