So now, in order to finish our course, we're going to do the quantitive of the materials used to build
the road, the asphalt, the aggregates, all the layers.
So let's remember here, I'm zooming in the section of a road.
Remember that we have a lot of layers that you will start to configure according to your project.
And so let's select here.
Right.
But let's go to properties and we can figure it here in this first layer.
Uh, so we have the PAVOL that paved to that.
So we have two layers of pavement over here.
We have a base.
So according to the aggregates here, you want to use here.
And we also have the sub base.
So we have the paved one paved to base one and sub base and all of the rest is zero.
And what we have to do first.
I'm going to click ask over here.
And we have in home analyze and compute materials.
We're going to select the alignment one and here the intermediate lines and click OK, in this new window
here on the bottom, I'm going to fill out this criteria.
Um, so these criteria we have over here.
Um, yeah.
No, that is empty.
We need to import here.
We're not going to work anymore with cut and feel, but we're going to calculate the materials.
So we're going to click right here on the bottom and on the left in import.
Another criteria, if you're using a symmetry, the older older version nine is twenty, twenty one.
But if you're using another version that you don't have this important other criteria you're going to
see.
I just clicked.
You're going to um you're going to see it will be already included here.
OK, well, I'm going to select here to cut a few.
Actually, sorry, I'm going to select the materialist and I'm going to click here and copy a copy current
selection.
Uh, I'm going to copy the actual selection and the software will personalize and create a new list
of materials.
And again, if your symmetry is older.
This option will appear over here and OK, look how interesting it is, we have the layers of hair material
name that the name of the materials of our layers and that what are we going to do?
We're going to open each one of them and we're going to do that.
What is inside?
OK, so we have the pavement, the base and subbase.
You can you can rename it.
OK, I'm going to type here aggregate aggregate, which is aggregate pavement.
So we base.
Um, OK, so let's delete what is inside.
Yeah.
Just select and come here on this X and what are we going to do.
Now we're going to add those layers of the section of our road and we're going to divide into these
categories.
So first let's select the category, um, the first one pavement and then I'm going to select the category
that we that the materials are going to.
To enter here in data type, select corridor shape and the corridor.
Shape just a select big one.
Yeah, data type color, shape, shapen, scholarship, paper one and click in here.
And so the first layer.
Yeah.
And now we gonna add the page to already here in page.
OK, let's remember all this.
You can change the name later according to the layers and the materials you're using.
And now let's go to aggregates.
Here is written aggregates um Kadare shape and I'm going to select now Bayes one.
OK.
It is inside aggregates and now we go select the subways and ready, now we have the division of our
materials configured according to the materials that we created our road that's clicking, OK?
And from this moment in this materialist case, here it is written materials copy to you because I already
created order lists.
OK, and that with this created list going to click OK, and now we're going to simply match the PAVOL
here.
We're going to select
here.
But it is OK, page one card corridor.
One page one and two, Caulder one, pay-TV two and a bass one, I'm going to match here with Carla
one by one and subways.
Carla, subbase here.
I'm going to click OK, everything's fine.
Look, now we have our material list over here.
That's OK.
Open here.
OK, everything's fine.
Uh, we're going to click.
OK, I'll take her, but I'm not seeing the report.
That's because we are going to generate to create it right now.
So here on the top, let's go to volume report.
Let's remember that we're here in Analise.
OK, uh, so volume report alignment.
Keep alignment one simple line.
Keep intermediate lines materialist dematerialised.
OK, and here in program data, let's remember what I told you about the selected material.
Yeah, you're going to keep it because of work for movement of earth and materials for material take
off and OK, that's OK.
Run the scripts.
And yeah, we have here our material take off.
Look how interesting we have the kind of type they are atop the square mirrors the volume, the cumulated
volume we also have.
The categories that we created, pavement aggregate subbase, so the softer go something, the delayers
in here and then we have the total volume.
So that's it.
I want to say thank you for having done the course that you're here.
I know that this path, in order to learn how to use Revit navvies, works security.
The all the softwares that use the same methodology is not easy, but congratulations, because you're
you're trying hard and I wish you success in your career.
And if you have interest on doing the other courses I have here, I also have the course because of
Revit, the navvies works and we welcome and thank you so much.
I wish you a lot of success in your career, in your life and see you next time.