So now what I would like to do is to create some wines here that connect to this individual parts of
this circle and we will write stuff on these slides.
So let's do that let's insert a line starting from here.
And then we do the same and we make a straight line something like this.
But obviously I want to make it more beautiful.
So let's start with this one right click for.
Shape.
First of all make it wider.
Let's make one point seventy five points for example and then click here at Begin R-OH type and select
this.
Here as you can see it created a little square here.
Let's make it bigger can choose the size here.
Right.
So you see now this is bigger.
Now let's make also the width here the same was.
Yeah.
One point twenty five.
OK.
However I would like it to be a different color from any of those.
So let's select for example some kind of gray if it fits.
Of course if it doesn't
hey I'll try this one.
Ok so my idea is to basically put this like this here but behind.
So you don't see this square here so it seems that it's going out of it.
First of all let's position it perfectly.
You know what I will change the color of this thing so you actually see better.
Just for now.
So let's put it YTN that's much better.
So what I want to do is that these corners here fit perfectly almost perfectly this arc.
So I need to rotate it like this.
As you can see rotate in it.
Now I put it down.
It seems more or less correct.
Now let's connect these two lines here and do the color of this one again as we did before.
And the good thing is that all what I need to do is to put this one behind.
So send two back and now it seems as if this little triangle here was sort of connected.
You see like a tether to this place.
We just need to move slightly this one so you don't see the separation.
All right.
Like this.
So let's do all of these lines for each of these arcs.
However in order to make it more beautiful we should start with the bottom one and you will see why
I'm doing that.
So start by coping just this little part here.
Ok then go down here and place it the same way here let's try to be almost as the where the other one
was
sent back.
OK.
So we have our connector.
Now let's copy this line connected to it.
So this one seems a bit bigger Let's make it smaller.
All right.
So now you see visually they seem coherent.
So the next step is to copy three times this line just to place them here wherever because then they
will connect here.
But let's make them at the right distance from each other.
So since we have this top on here and the bottom one placed here all what we need to do is to select
all of them then go and format a line and say distribute vertically.
Now the distance between each of these lines is exactly the same.
And from now on we can connect them.
So let's do this.
All right.
As you can see some things are not perfect.
So you need to arrange them by zooming in.
So this one can put slightly higher.
Now it seems good.
This one here is probably not long enough.
Crane.
Let's move this line on the right of that.
All right I'll keep this one.
Also here is perfect.
This one down here.
I just move them on the left with the keyboard for now.
This one still doesn't look good.
Let's put it up.
OK.
Even if I put it slightly higher you know it doesn't matter.
Visually you can not see the difference.
There's just one pixel higher.
I'm not a big deal.