Guys, welcome back.
Now finally we are going to start adding
some dimensions to our drawing 0.
So let's go to working drawing first.
To start creating your dimensions.
You can click on the dimension tool
or you can press D on your keyboard as well.
It would activate the dimension tool.
Then you can simply click once
and you click the second time.
And then you need to click the thought time
to create your dimension.
Now you can see that the dimension is ideal for A1,
say the size excise looks good.
But if you want to increase the size
to change the divergences as the default,
Let's open textile and dimension style
and let's select the dimensions.
Now you can see it's set at ten,
so maybe let's keep it at.
Now let's draw our diamond shape.
That looks better. Let's give two-dimensions this way,
which is the length and the width.
And then if you want to match this nitrogen, you can,
you can use the style icon,
click on the dimension and apply it here.
Now you can see that increases the size.
Now, this dimension is linked to the wrong point,
ideally an interview or drawings,
it's linked to the inside edge of the wall.
You can simply drag
that endpoint and then place it to the corner there.
Similarly, it as well.
Let us do it for this dimension.
Let's click that corner and place it an endpoint.
These are the groups
that come for each dimension. Alright?
Now if you would like your dimension to
be not horizontal but along the dimension,
then you can click on Align.
Then you can see that the damage and
follows the dimension layer.
Now I can draw the setting out for the windows as well.
Let's move this language line on top,
and then let's create a dimension again.
It's gonna be from this point.
This point.
Sometimes you may not have selected the right endpoint.
You will have to select this edge
and drag this end point to that corner there.
Now both of them seem to be sitting
directly on top of each other.
This is 175 of them.
Now let's click on the dimension tool again,
and then click on the model and point always,
make sure you snapped to the model endpoints in
your model that we click that and
then this model endpoint then moved up.
Then we need to click on that model endpoint.
This.
Finally, the inside endpoint.
Always make sure you're clicking on the modelling points.
That looks good. Maybe I can
just move this to the top of it.
I always keep switching between dimension and Spacebar.
That's how you work and sketch up as well.
Now, one important tip,
which I forgot to mention
is that when you're drawing your dimensions,
always make sure you're drawing the right layer.
So let's open layer 0.
Now you can see that we've drawn then the ACP plants or
for high the ACP plan at heights,
these are averages as well.
So let's select all of these dimensions.
Right-click, go to move
to layer and click on furniture plan.
Now you can notice that when I was doing that,
I ended the SketchUp model.
And then what happens
is I sort of misplaced the view as well.
So it's moving around.
It's always a good idea to lock your viewport.
I'm going to press Control Z and then Control Z
again so that I'm
not inside the viewport and press Escape.
Now I just need to select this viewport,
go to my SketchUp model,
and then you'll get an option to lock this viewport.
So if I lock this and I can
see that it has a red bounding box.
And now I won't be able to and build
this view in paper space.
This way, you can avoid
double-clicking and entering your viewport.
One thing which I missed was that when
I noticed this dimension,
it's actually 224th amendment 188, which is wrong.
It's supposed to be around 4 thousand MM.
Know the reason behind this error is because I
haven't snapped the dimension to the model and bind.
If I draw another dimension,
I'll click on dimensioning
and snap it to the modelling point.
This model endpoint.
You can notice that the size is 4470,
which is the cardiac sites.
The correct this what you can do is you
can either delete it and create it again.
All you can select the dimension
and then go to your dimension,
style her, and click on auto scale.
Now we need a Jane low two scale
from one is to 11 is to 20.
And now you can see that it
matches the damage and on top.
But ideally, I would suggest that you try to
snap your dimensions to the model endpoint.
So I'm gonna delete those dimension,
then move this down a bit.
Then I'm going to delete this dimension as
well and then create another diameter,
so plus D. And then select the model endpoint.
This modelling. So now we have the correct damaging.
Also we need to change the orientation.
So let's click on a line and we are done.
Now I'm going to shift this x down a bit
to select all those texts plus shift and down arrow key.
And then I can draw my dimension 0.
So let's click on D again,
and then click on the modeling point.
To this model endpoint.
That's around 10000000067.
You can also move this text to
the left ear and do this by
double-clicking and then select
the text and move it to the left.
Or you can move to the center as well this way.
But let's move to the left a bit.
Then let's continue drawing our dimension.
So plus d again.
And then let's click on this modelling point.
This point here.
Then from this point to this point.
Finally from this point.
Finally from this point to the inside edge of the one,
which is around six inches.
This looks good. And then I can
do an overall dimension as well.
Let's click on D again.
Select that endpoint.
Then select I've selected both those endpoints.
Now it is two MM shot.
So there's 44704468.
Sometimes you may want to adjust it manually as well,
so you can say until this group and then get 4470 SPSS.
You can give it manually as well.
In case it's not reading Docker images,
select this dimension instead of more than,
not more than the entire damaging because it
moves that way when
we're selecting the center grip and then moving it in.
And then finally we have a point here.
I would like all my damage that will be aligned.
So I'm going to play D and then change it to align.
And then I create the damage.
And again, now it comes in.
This is 3754 and there is a difference of three MM.
I may have to endogamous group and give value of
d Phi sine Phi seven SPSS.
There are some limitations and you
were working with layout for SketchUp,
but that shouldn't hinder you from completing your plan,
especially if it's your presentation.
This is a setting out plan of the windows and the doors.
You can go ahead and also create
another copy of this floor plan,
of this financial plan,
and then set outdoor furniture as well.
So maybe you can set out the furniture for the bed,
for the devil and so on.
But for now this should suffice.
And then I can go ahead and
create dimensions for all my other plants.
Again, you can notice that I've given
the dimensions to the wrong layer.
So if I hide, can see that inherits all of
those dimensions or select all these dimensions.
Right-click, go to click
on Multiple layer and Glaucon furniture plan.
Now if I hold for any Japan, everything gets it in.
For this.