All right, next is ACP layout.
We can make the ACP blended
actively earned and start creating our divergence.
Great. So now these damaged to the command correctly.
Now you may have noticed that the dimension of
snapping to all these lines Z0,
which is coming from the floor.
So it's a good idea to hide
the flow in your SketchUp model,
or you can assign the floor to a DAG as well.
Let's see if this is assigned to any tag.
So let's select those SketchUp model code
to sketch a model you.
Then you can see that we do not have any flow tags.
So let's open SketchUp quickly. Let's select the fluid.
Then it's created a tag called his floor.
Then we can assign this to that tag.
So let's go to Entity Info and assign it to a float.
So now let's see the result.
Then let's go back to as
SketchUp and layout for SketchUp,
select the viewport and click on
the link button your update.
And now the tag should show up under tags.
You can see the Florida shown up so
you can simply switch off the fluid.
Once I start the floor, it looks more neat.
Then I can start creating the dimensions
for my lighting data.
Some principles that architects
follow when they create
the dimensions for certain plants.
Now, in this example,
which is a bad example ever created,
dimension on top, bottom, left, and right.
Now there is no real need to
short on the top and the bottom.
Because I know that this same dimension
would reflect here,
wizard, I'm going to delete this,
and then I'm going to delete this.
So it's a good idea to minimize the number of
dimensions you add which don't make sense.
And also how architects read
dimensions for a certain room is now for example,
if this room is 4470 by 3759,
let me just create the text as well.
Now what this dimension indicates that
the first direction is
the length and then the second one is the width.
So it's always linked into width.
When you check flow plans drawn by architects,
they always start with the longer dimension or the top
damaging first in the first position
and then the second dimension.
Please make sure you follow
this principle when you create your own drawings
and don't replace it by giving it 3759 by 4470.
That would be confusing for
architects and contractors as well.
It's always follow the first long
dimension, which is 4470.
This will be the length and
this will be the width dot dot.
Now I can create my lighting and dimensions as well.
So I need the lighting to snap
right in the center of the slide.
So I will draw some reference lines.
I'm going to draw one line this way,
press Escape, and then draw another line this way.
Let's do it for all the lights.
Now I can draw my divergence so I can click on D again.
Then I can select any point here.
Then select the midpoint. Seven-sixths.
Select this midpoint.
Now you can see that this dimension is
wrong because it's 123 of them.
Now the reason why it's reading what,
23 MM, because it's reading the papers scale.
You'll have to change the dimension scale for this.
To select the dimension,
go to damaging styles,
select autoscale and change this to owners to 20.
This is the correct size.
Now let's go back. Finish this direction.
Now let's draw from the top
and the other group and it moved that dimensional adult.
Maybe like this, then contribute co-creating a dimension.
This dimension as along as well.
So let's match using the sample state,
select this nurturing and apply it here.
Change the scale.
Then we continue creating a damage in lighting design.
When you're placing lights,
it's a good idea to follow the X to X rule.
I'm going to do if these
text double-click and name this as x.
This is gonna be two x.
And then this is going to be X.
Again.
I can also hide this floor lamp.
You do not want to see the flow lamp.
Or maybe I want to see the floor lamp in dashed line.
I can draw a circle, loose edge,
select the circle, go
to shape style and change this to dump it.
Then go to sketch, view and hide this.
Assign it to furniture tag.
So let's go to tags.
You can assign it the light stack as well.
Odd, it would be better signage to the foliage or tags.
So I'm going to assign this to furniture.
Once I've assigned it to fund check and see if
it didn't go back to layout.
Right-click, you need to update this model,
but it wouldn't show up in SketchUp model because it's
locked that I click on Lock and then update the model.
It's an all we need are simply hide
the tags. So let's go to tag.
So I'm going to move furniture.
And you can see that the furniture grocery grid.
Now, this would be x as well.
So let's call this x. Let's also
move this back to the center.
And let's call this x.
Now what this denotes
is that x is the distance from your,
which is from this edge to the center of the light.
Then to double the distance of this distance.
And finally x, so x two x x.
And then here we can rename this as wha, wha,
wha, what the contact that
does is that the entire distance is 4470.
And then you would divide that by four.
So x two x three for x plus two,
x plus x is four x.
And then you divide this by
four and then divide the space
into four points, four lines, 1234.
And then you would equally space the lights on 0.1.3.
And then in-between would be
the double spacing. Hope that made sense.
Similarly for this line as well,
he'll take this entire distance,
3759 divided by four, and then split,
split that entire wall into four equal parts,
and then place the one later and one light here,
which will come on the second,
fourth part of this wall span.
That's a quick lighting there for you guys in case you
want to space your lighting properly in the room.
Now in all this light is in place properly in
SketchUp and that's why
this dimension wouldn't make sense.
No, because this damages are bigger than this dimension.
So in that case, you will have to go back to SketchUp,
divide the lines equally,
place your lights correctly
and then bring it back to Leo.
There's no way to the right lines in Lille,
two left to do in SketchUp and then bring it to.
You can also notice that I have
an extra box which I don't really want to see.
Instead of going to sketch up
and then hiding this box and
other quick hack which you can
do layout is simply using the rectangle tool.
So select the Rectangle tool,
click once and click
the second time procreative rectangle.
Select the rectangle and go to your shapes failure.
And we can keep the field as white.
And also we can select
the stroke and make the stroke as white as well.
So that is no failure yet.
So let's add a fill as well.
The fill is added as well.
And now you can see that it covers
that box perfectly as invisible.
Alright, since, since we
created everything in the right layer,
Let's go to layers here.
And if we hide the SEP plan,
you can see that the ACP layout height schematically.
Sometimes you will notice
this yellow triangular, which is sort of an arrow.
So to fix this,
you need to simply update this model.
So select this model, right-click and click on Lock.
Then select the view. Go to
SketchUp model and simply click on the link.
That would get rid of that at other.
Then I can click on Lock.
Let's hide our furniture plan is when you're
done creating our ACP plan in
the next video to outer diameter,
outer sections, which is a fairly simple process.
So see you guys next video.