Hey guys, welcome back. In this video
is show how to damage in this section.
The first thing we need to do
is activate the right layer.
So we'll start at Section III.
And I can hide the ACP plan.
Now, I will create all my divergence in
this view, but in this layer.
So publicity to activate
the damaged gene pool and then it
starts clicking on the motor points.
So you can see that model edges also work well.
Let's select the model edge and let's create
an entire height of the room,
which is set at 2467.
You can also go ahead and show
the slab thickness if you lake,
but if it's interiors,
you don't really need to show the slab thickness.
Now we had the lighting yard as well,
so you can maybe set out
the divergence for the lighting if required.
But usually interior designers set
out the dimensions for the interior furniture.
We can start by setting
out those squatting year in this case,
which is around 125, which is five inches.
Then we can set out the furniture lizard,
maybe the bedside table.
And I can also set that I mentioned from
maybe the height of this side unit here.
Let's create the dimension from
a modern edge to the height.
That's it. 1739 of them.
So let's move in.
Always make sure you drag
the gripper, not Android origin.
Also, make sure that none of the dimensions overlapping.
That would be very unprofessionally. Look at.
This looks very neat written
on other dimensions overlapping.
And you set it out correctly as well.
If there are some furniture damages,
you can set them out separately inside.
Maybe I can show the warlord
from the bottom of the wall art,
blue bottom off of fluid.
Then select the dimension.
Let's go to Shape Styles.
And let's add a fill color.
You can see that now damage in overlaps
that furniture so you
can read it average and courage gizzard.
So add a fill color in case you want to
add that effect of the damage.
You know, I don't really give a diversion on top
of the section because
generally you can read that I
mentioned from the floor plant,
but maybe I can give the height of the curtain rods.
Let's give the height of the curtain rods set up to 3367.
Alright, so now I'm going to quickly
go ahead and dimension notice
sections which would be like sort of in a time-lapse.
And you guys can see my workflow as well.
Alright, one last step,
which I would give is always make sure
you draw a separate floor.
Any odd interior drawings,
because most interior show the floor thicknesses URL,
we had a slab and then we have the actual float,
which would be around an inch
thick or an old ten to 15 of them tick.
You can manually place a rectangle for now, like this.
Then move to they just this way.
Let me just move this gripper
and then move it to the edge.
So you could manually draw floating this way if required,
and then change the shape,
style or shape fill that is,
you could do it this way as well, but ideally,
I would suggest that you do it in,
Sketch Up, draw a fluid,
and then bring it back into layout.
I'll let, so that's a quick tutorial
into creating the section dimensions.
In the next video, I'll show you how to
add annotations in layout and
then annotate all of these objects are for teachers.
And as an exercise,
you guys can go ahead and
annotate or divergent the rest of these views as well.
I'll see you guys next video.